Category Archives: Electrical Grounding

Prepare for Cooler Weather with New Electrical Equipment

Posted on by

Fall is here, which makes this a good time to start thinking about winter electrical installations. Each season has its own electrical demands, like air conditioning in summer. As fall continues, it is a good time to consider any upcoming electrical projects or needs before the weather turns cold.

Frozen PipeCommercial

Heat tape systems can be used for several applications, including freeze protection for pipes and tanks, maintaining hot water temperature, de-icing and snow melting. Our experienced electricians can install a new heat tape system for your commercial property that will meet your needs and keep plumbing fixtures free of freezing problems.

Residential

Is it time for a new boiler or hot tub at your home? The skilled electricians at Always On Electric can safely complete the power installation for your new hot tub, boiler or steamer.

Tired of the power going out during winter storms? Always On Electric has you covered here, too, with professional back-up generator solutions. Don’t take a chance on your safety and comfort this winter!

Agricultural

The agricultural industry works year-round, with no break for bad weather. Winter brings unique challenges for farmers and ranchers because of water troughs or buckets icing over whenever temperatures fall below freezing. Trough heaters are the solution to the common wintertime chore of breaking up ice so that animals can drink.

Industrial

Severe winter cold can shut down an entire truck fleet, but using engine block heaters can help ensure your trucks will start in the morning after a long, cold night. Of course, each heater requires a fair amount of electrical power, and powering multiple truck heaters will probably require some new wiring. Our electricians can help you safely add the connections you need to power your truck heaters this winter.

Always On Electric provides a full range of electrical services for clients throughout western Colorado. Contact us today at 970-309-2616 to prepare for fall with new electrical equipment and wiring installations.

Ways to Save on Your Commercial Electric Bills

Posted on by

Businesses looking to save on their electric bills can make several simple changes that add up to big savings throughout the year. No matter if you operate a small office with a few employees or have a bigger business that requires a larger number of electrical devices, you’ll be pleasantly surprised with the amount of money you can save with minimal effort.

Saving money on electricl bills with LED lighting

Get an energy efficiency audit

A great way to get started with lowering your business’ electric costs is by hiring a professional electrical company to come and look at your site. The electrician will spot a few ways in which you can be saving on your energy usage and will give advice on what you can do to fix the issues.

Common things that can be found in an energy-efficiency audit include air leaks, insulation issues and inefficient lighting.

It is suggested to also do an after-hours audit on your own once you have gotten an energy audit from an electrician. It’s best to do the audit a few hours after workers have gone home, or even on the weekend, to see what devices and lights stay on when people are out of the office.

Switch to LED lighting

Another way to save big on your commercial electric bills is by making the switch to LED lighting. This lighting not only emits less heat that incandescent and halogen lights, it uses roughly 75 to 80% less energy overall.

After you’ve made the switch to a LED system, you can save further by installing motion sensor lighting or by simply reminding people to turn lights off once they leave a meeting area or lunchroom. Creating more natural light can also create big savings by encouraging workers to leave lights off during the day.

Choose laptops over desktops

Replacing older desktop computers with laptops is a great way to save money. When you need new computers at your commercial site, be forward thinking and choose this energy-efficient option.

Laptops use less power than their clunky counterparts and many workers will even take the laptops home at the end of the day, avoiding overnight energy costs for your business. Even better, laptops allow employees to work from home with ease, which can create greater savings.

When you want to save on your business’ electric bills, we are the licensed and certified commercial electrical team to choose in Western Colorado at Always On Electric. Our electricians will be happy to come to your commercial site and offer our opinion on ways to save on your energy bills. We can also assist with any LED lighting installation, service upgrades, building lighting and more. Call our experienced electrical team at 970.309.2616 to get started!

Warning Signs It’s Time to Re-wire Your Home

Posted on by

Re-Wiring Home Does it feel like you blow a fuse at least once or twice every week? There’s a chance that you could have too many appliances plugged into one circuit. There’s also a chance that your home’s electrical system might be outdated and that you could benefit from rewiring your entire home in the near future. Take a look at some of the other warning signs you’ll likely notice when it’s time to rewire your house.

Your home is more than 40 years old.

Electrical systems have advanced a lot over the course of the last few decades. So if you have a home that was built 40 years ago or more and you’re still using the original electrical system, it’s probably just about time to think about updating your system. By rewiring your home, you can make it a lot safer and avoid many of the potential problems that come along with using an older system.

Your home has aluminum wiring in it.

Speaking of outdated electrical systems, there was a time when many systems relied on aluminum wiring. That is, until electricians started to figure out that many aluminum wires ended up causing fires once they got old. Today’s electrical systems rely on copper wiring as opposed to aluminum and are noticeably safer. You should consider going with copper if you still have aluminum in your home.

Your home has certain outlets that have stopped working altogether.

Are you running extension cords all over your house to power up certain rooms? This might seem like a reasonable solution, but extension cords should not be used for this purpose. You should have an electrician come take a look at your nonfunctional outlets. They might be repairable, or they might be a sign of a larger problem within your home’s electrical system.

Is it time for you to update your home’s electrical system? Always on Electric can help you with it. Call us at 970-309-2616 today to set up an appointment with one of our reliable and experienced electricians.

Leading Causes of Electrical Fires

Posted on by

Although they may only account for a fraction of residential fires, electrical fires can be devastating and even fatal. To prevent your having any issues at your home, be sure to check the following areas of your house that are the most common places where electrical fires start.

Failed Electrical OutletOutlets

If you go to plug in an appliance and nothing happens, it could be a sign that the wiring leading to the outlet might be loose. In this compromised state, the wiring could be exposed behind the call, potentially leading to contact with wall insulation or causing sparking behind the outlet. To fix this situation, have an electrician come out and look for the cause of the outlet failure and make any necessary repairs to the connection or the outlet itself.

Appliances

Speaking of appliances, whenever a power cord becomes frayed or starts to fall apart, you should have the connection repaired or replace the cable, if possible. Exposed wires can be dangerous for anyone using the appliance and can allow heat transfer from the connection to combustible surfaces that the cord may be set on. In fact, faulty appliance connections and outlets are the leading causes of home fires. Also, if you feel a mild shock or tingle when touching an appliance, it often is a sign of a ground fault or incorrect wiring. Don’t simply ignore it – call an appliance repair professional or electrician to come take a look.

Circuit Breakers

Although circuit breakers are meant to prevent a circuit from overloading, sometimes they can do their job a little too much and that’s a problem. Modern equipment and technology often requires more power than devices even a few years ago, which can put extra strain on an outdated circuit breaker. If your breaker continues to trip, it is time to contact an electrician. An older breaker box can have wear that prevents the circuit from being thrown properly or allow an overload to start a fire. Be safe, not sorry, and call an electrician to investigate and replace your breaker box, if needed.

Light Fixtures

Make sure that all of your light fixtures have bulbs that meet the proper wattage capability of the fixture. If the bulb’s wattage is too high, it could lead to an electrical fire. If you aren’t sure about the proper wattage, a simple way to test is to check the area around the fixture once you put a new light bulb in. If you feel heat, switch to a lower wattage bulb as the current one’s wattage is too high for that fixture.

If you think your home might have faulty wiring or the wiring is in need of repair, let Always on Electric help. We offer residential and commercial electrical services to keep your home or business protected from electrical fires. For more information, call us today at 970-309-2616!

Why Is Grounding Important?

Posted on by

Electrical grounding is an important safety feature of modern wiring in homes and buildings. While modern homes are required to have an electrical ground, many older homes may not have been upgraded. Let’s explore what electrical grounding is and why it’s so important.

Electrical GroundingGrounding has been required in all homes since around the 1960s, and is an important part of any home electrical system. In the case of an electrical short circuit caused by frayed, loose or damaged wiring, electrical systems equipped with a ground will carry the electrical current safely away from the appliance, fixture or receptacle and to the earth where it is dissipated safely. Modern electrical receptacles have three slots to allow for a special ground wire – the “mouth” of the “face” in a three-prong outlet – while older receptacles that are not grounded have only two slots.

One benefit of electrical grounding is protection from power surges. A power surge may occur for a number of reasons, and may originate from inside or outside of the home. Lightning strikes are a common cause of powerful power surges that originate outside the home. Surges that start within the home are not as significant as the surges caused by lightning, and are often caused by electrical appliances starting and stopping.

Modern electronic devices are particularly vulnerable to even minor power surges. A surge of as little as 10 volts can cause damage to the microprocessors contained within computers, televisions, mobile phones and other electronics. Proper electrical grounding helps to protect these sensitive electronic devices from the damage caused by power surges.

Another important benefit of electrical grounding is protection from electrical shocks. A loose wire or damaged electrical component in an appliance may allow electricity to flow into the appliance. With electrical grounding, this current will be safely carried to the ground outside of the home where it can be dissipated. Without electrical grounding, a person who touched a malfunctioning appliance could receive a dangerous electrical shock.

Always On Electric is an experienced electrical contractor serving homes, businesses, commercial facilities and agricultural operations throughout western Colorado. Our knowledgeable and experienced staff can help with any electrical project needs, from installing new fixtures and service lines to upgrading the electrical system in your building. Call us at 970-309-2616 to learn more about our full range of electrical services and to request a quote on your electrical project today.

How Does Cold Weather Affect Electrical Systems?

Posted on by

Cold weather can have a very big impact on how your electricity works. Winter can bring major storms in some areas of the country, and in Colorado, it definitely can. Freezing temperatures also can affect the way your electrical systems work and cost you more money when it comes to energy bills. The solution to the problem is to always make sure everything is running smoothly and properly before heading into the winter season or before a storm.

Electrical problems in home during Winter

What Occurs to Electrical Systems During the Winter

Yes, power outages can occur during the winter either from storms or freezing temperatures. For instance, if there are freezing temperatures, your electricity might have to work harder to heat your home. If your home has an electrical furnace, then it will be working harder, especially if there are other space heaters in specific rooms.

On certain colder days during the winter season, electrical heaters are turned up, which can cause the electrical system to overload, thus causing a power outage in many circumstances.

How to Prevent Electric System Problems

First and foremost, it’s essential that you minimize your energy use during the winter season. One of the easiest ways is to turn your thermostat down just a few degrees. This can help with your energy bills in the winter. Evaluate which rooms of your home you’re using the most. If you only spend time in a couple, use space heaters to heat those rooms for a short period while turning your furnace down for the rest of the home.

One of the best ways to make sure your home’s electrical systems are working properly is to have them serviced and evaluated by a professional like Always On Electric. We can make sure your backup generator is ready to go and make sure you have the correct service upgrades. Contact Always On Electric at 970-309-2616 today or visit us online for more information!